www.recumbents.com - Building a recumbent kit
www.recumbents.com
www.recumbents.com
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
 All Forums
 www.recumbents.com
 Technical / Bike Building
 Building a recumbent kit
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Solenoid
Starting Member

Switzerland
1 Posts

Posted - 06/30/2011 :  03:56:41  Show Profile  Visit Solenoid's Homepage  Reply with Quote
I have been interested in recumbents for a long time now, but never ridden one. Lurking around the internet for a year or so I found that the best solution is the Cruzbike Recumbent kit (http://cruzbike.com/conversion-kit) which allows conversion from a normal (full suspended) bike to recumbent and that with FWD - which not only seems to be practical, but also logical IMO.

I'm also an engineering student and must soon attend a mandatory machining internship (and everything related to it), so I figured why not build the kit myself, it doesn't take a lot of parts, I know SolidWorks quite well and can draw anything... as long as I know what I'm doing, but I don't know the first thing about bicycle frame geometry.

Can anybody help me in this process? The only thing I'm really looking for is the geometry part (fork and seat), the brazing/soldering will be explained at the internship. My goal is the draw the parts in SolidWorks so I can use them while machining.
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
www.recumbents.com © 2019 www.recumbents.com Go To Top Of Page
Snitz Forums 2000